• 3.10 • 3.11 • 3.12 • 3.13 • 3.14 • 3.15 • 3.16 • 3.17 • 3.18

call_detail

Each row of the call_detail table contains a set of data related to the processing of a single interaction, including some interaction-level aggregates, such as total interaction duration and total talk time. Note that the entire interaction record in this table is reported for the interval in which the corresponding interaction was entered the system (for inbound interactions) or was initiated (for internal and outbound interactions), regardless of the number of intervals the interaction may have spanned.

For emails, a record is created in this table as soon as an email arrives in the system (for inbound emails) or initiated by an agent (for outbound emails). The record is then updated every time it is saved as a draft. The record is updated and closed when the processing of the email is finished.

Except for the name of the table itself, the term call in the descriptions below indicates that the parameter applies to calls and chats. Where a parameter has the same meaning for all media types, the term interaction is used. Where a parameter applies to multiple media types with a different meaning, each media type is discussed separately.

Description of Data

The following table offers the name (i.e., ID), data type (e.g., BIGINT, BINARY, BIT, DATETIME, ENUM, INT, VARCHAR, etc.), and description for each metric (i.e., column) of the call_detail table.

Column Name	Data Type	Units	Description
id	BINARY (16)	None	Reserved
pkid	INT	None	Primary key
agg_run_id	BINARY (16)	None	Aggregator run that produced this record
media_type	ENUM	None	media_type specifies the interaction media type with possible values of VOICE, CHAT, or EMAIL. If set to CHAT, any call mentioned in this table shall be interpreted as a service chat interaction in the same context.
start_time	DATETIME	Seconds	For inbound interactions, start_time specifies the date and time when the interaction entered the system. For outbound and internal interactions, start_time specifies the date and time when the interaction was initiated. The time is given in the Universal Coordinated Time (UTC) time zone.
ivr_time	BIGINT	Seconds	Total time the call spent in IVR
queue_time	BIGINT	Seconds	Total time the interaction spent in the service queue
pending_time	BIGINT	Seconds	For inbound calls, pending_time specifies the duration of call ringing phase from the moment the call was distributed to an extension and until it was either answered or abandoned. For internal and outbound calls, pending_time specifies the duration of call dialing phase from the moment the dialed number was received by the system and until the call was either answered or abandoned. It does not apply to email.
talk_time	BIGINT	Seconds	talk_time specifies the total call talk time. It excludes hold time. For chats and emails, talk_time is the total in-focus time (the time the interaction was selected in the active communications lists of the agents who processed it).
hold_time	BIGINT	Seconds	hold_time specifies the total time that the call spent on hold. For chats and emails, it is the total out-of-focus time (the time the interaction spent at the agents’ desktops excluding the Talk time).
acw_time	BIGINT	Seconds	The amount of time the agents spent doing after-call work related to this interaction
duration	BIGINT	Seconds	For calls and chats, duration is the total duration of the interaction from the moment it entered the system or was initiated and until it was released. For inbound emails, duration is the time between the moment the email entered the system and the moment when the first meaningful response was sent (or the email was closed or transferred externally). For outbound emails, duration is the time between the moment the email was initiated by the agent and the moment the email was sent. Note that transferred and recategorized interactions produce multiple CDR records, where the first record shows "Duration" as empty string and the last record shows the total interaction duration. Duration always shows calendar time (the total time between the specified moments) regardless of hours of operation of the associated service. For example, if an email was received at 4 pm and replied the next day at 10 am, the duration will show 18 hours, even if the call center was closed during the night.
service_name	VARCHAR	None	service_name specifies the name of the service associated with the interaction. If the interaction was recategorized or transferred to a different service, each such event will produce a new record with the new service value.
scenario_name	VARCHAR	None	scenario_name specifies the name of the scenario used to process this interaction. If the interaction was processed by multiple scenarios, the first applied scenario will appear in this field. (Other scenarios that may have been invoked from the main scenario do not affect this field.)
trunk_description	VARCHAR	None	For inbound and outbound calls, the name of the trunk that was used to establish this call
caller_login_id	VARCHAR	None	For outbound and internal interactions, caller_login_id specifies the login ID of the user who initiated this interaction. If the interaction was transferred, login ID of the user who initiated the transfer.
callee_login_id	VARCHAR	None	For inbound and internal interactions, callee_login_id specifies the login ID of the user who received this interaction. If the interaction was transferred, it specifies the login ID of the user for which the interaction was last transferred.
caller_phone_type	ENUM	None	caller_phone_type specifies the location of the party that initiated the interaction. Possible values are INTERNAL or EXTERNAL.
callee_phone_type	ENUM	None	callee_phone_type specifies the location of the party that received the interaction. Possible values are INTERNAL or EXTERNAL.
caller_rank	VARCHAR	None	For outbound and internal interactions, the rank of the user who initiated this interaction
callee_rank	VARCHAR	None	For inbound and internal calls, the rank of the user who received this interaction
from_phone	VARCHAR	None	The phone number from which the call was made, or for emails, the email address in the "From" field
original_destination_phone	VARCHAR	None	original_destination_phone specifies the phone number that was dialed by the calling party. If the call or chat was transferred, it specifies the phone number dialed by the party that made the transfer. For emails, it is the email address used as the destination by the original sender.
connected_to_phone	VARCHAR	None	connected_to_phone specifies the phone number of the party to which the call or chat was delivered. If the call/chat was transferred, it specifies the phone number of the party to which the call/chat was last transferred.
transferred_from_phone	VARCHAR	None	For transferred calls and chats, the phone number from which the call/chat was last transferred
disposition	ENUM	None	disposition specifies how the interaction ended. The term call in the descriptions below indicates that the given value may be applicable to calls and chats. Possible values include the following: CALLER_TERMINATED – Call terminated by the party that made the call (after the call was answered) CALLEE_TERMINATED – Call terminated by the party that answered the call TRANSFERRED – Interaction was transferred by the party who accepted it (the after-transfer phase is reported in a separate record) CONFERENCED – Call became a conference (the conference phase is reported a separate call) SYSTEM_DISCONNECTED – Call was terminated by the system SELF_SERVICE – Requested service was provided by the IVR application (as indicated by execution of scenario block Self-Service Provided) ABANDONED – Inbound call was terminated by the by the caller while processed in the IVR application (except the SELF_SERVICE case above) ABANDONED_QUEUE – Inbound call was terminated by the caller while waiting in the service queue ABANDONED_RINGING – Inbound or internal call was terminated by the caller after it was delivered to the called party and before it was answered (or before the No Answer timeout expired) NO_ANSWER – Inbound, outbound or internal call attempt was terminated after it was delivered to the called party desktop and was not answered within the No Answer timeout CALLED_PARTY_BUSY – Outbound call attempt was terminated because the called party was busy NETWORK_BUSY – Outbound call attempt was terminated because of the network congestion CALLER_TRANSFERRED – Call was transferred by the caller (the after-transfer phase is reported as a separate call) CALLBACK_REQUESTED – Call was terminated because a callback was requested (the corresponding callback attempt is reported as a separate call) REPLIED – Email was replied to; applies to inbound emails only CLOSED_WITHOUT_REPLY – Processing of the email was finished without a reply (e.g., the email was a spam or no follow-up was necessary); applies to inbound emails only SENT – Email was sent; applies to outbound emails only DISCARDED – Email initiated and subsequently discarded without being sent; applies to outbound emails only SERVICE_CHANGED – Agent changed the service associated with the email and continued processing it (the after-service-change phase is reported in a separate record)
agent_disposition_name	VARCHAR	None	Name of the disposition that was assigned to this interaction
agent_disposition_code	INT	None	Numerical code (if defined) of the disposition that was assigned to this interaction
agent_disposition_notes	LONGTEXT	None	The text note that the agent wrote regarding the interaction
reported_problem	ENUM	None	reported_problem specifies the call quality problem as reported by the agent during this call using the report a call problem desktop control. Possible values include CALL_WENT_SILENT, CALL_DROPPED, POOR_VOICE_QUALITY, and OTHER
global_interaction_id	BINARY	None	Global interaction identifier
initial_call_id	BINARY	None	For transferred calls, initial_call_id is the identifier of the original interaction in the transfer sequence. It is maintained for backward compatibility only. Starting from release 3.11, use of the global_interaction_id is recommended for all interaction identification and linking purposes.
initial_start_time	DATETIME	Seconds	For transferred calls, the start time of the original interaction in the transfer sequence; time is given in the Universal Coordinated Time (UTC) time zone
initial_service_name	VARCHAR	None	For transferred interactions, the name of the service associated with the original interaction in the transfer sequence
initial_caller_phone_type	ENUM	None	For transferred interaction, this is the location of the party that initiated the original interaction in the transfer sequence. Possible values include INTERNAL or EXTERNAL.
initial_callee_phone_type	ENUM	None	For transferred interactions, this is location of the party that received the original interaction in the transfer sequence. Possible values include INTERNAL or EXTERNAL.
initial_from_phone	VARCHAR	None	For transferred calls, the phone number from which the original call in the transfer sequence was made
initial_original_destination_phone	VARCHAR	None	For transferred calls, this specifies the phone number that was dialed by the original calling party in the transfer sequence was made. For emails, it specifies the email address used as the destination by the original sender.
initial_connected_to_phone	VARCHAR	None	For transferred calls, the phone number of the original party in the transfer sequence to which the call was delivered
flagged	BIT	None	TRUE if the interaction was flagged by agent; FALSE otherwise
voice_signature	BIT	None	TRUE if customer’s voice signature was collected during this call (i.e., the corresponding recording contains voice signature); FALSE otherwise
account_number	VARCHAR	None	account_number gets the customer’s account number. If the calling list record that initiated this call has a list field of Account type, the value of that field will be stored here. Account numbers can be used as selection criteria in interaction records search.
caller_first_name	VARCHAR	None	First name of the party that originated the interaction
callee_first_name	VARCHAR	None	First name of the party that accepted the interaction
caller_last_name	VARCHAR	None	Last name of the party that originated the interaction
callee_last_name	VARCHAR	None	Last name of the party that accepted the interaction
caller_team_name	VARCHAR	None	Name of the team that the agent who originated the interaction is a member of
callee_team_name	VARCHAR	None	Name of the team that the agent who accepted the interaction is a member of
caller_monitored	BIT	None	TRUE if the party that originated this interaction was monitored at any time during the interaction handling
callee_monitored	BIT	None	TRUE if the party that accepted this interaction was monitored at any time during the interaction handling
caller_interaction_step_id	BINARY	None	Identifier for the interaction segment of the party that originated this interaction
callee_interaction_step_id	BINARY	None	Identifier for the interaction segment of the party that accepted this interaction
caller_rtp_server_id	BINARY	None	Identifier of the RTP server that made the recording for the interaction segment of the party that originated this interaction
caller_recording_url	VARCHAR	None	URL of the recording for the interaction segment of the party that originated this interaction
caller_cpa_rtp_server_id	BINARY	None	Identifier of the RTP server that made the recording for the CPA portion of interaction segment of the party that originated this interaction
caller_cpa_recording_url	VARCHAR	None	URL of the recording for the CPA portion of the interaction segment of the party that originated this interaction
callee_rtp_server_id	BINARY	None	Identifier of the RTP server that made the recording for the interaction segment of the party that accepted this interaction
callee_recording_url	VARCHAR	None	URL of the recording for the interaction segment of the party that accepted this interaction
callee_cpa_rtp_server_id	BINARY	None	Identifier of the RTP server that made the recording for the CPA portion of interaction segment of the party that accepted this interaction
callee_cpa_recording_url	VARCHAR	None	URL of the recording for the CPA portion of the interaction segment of the party that accepted this interaction
caller_encryption_key_id	BINARY	None	For internal use only.
callee_encryption_key_id	BINARY	None	For internal use only.
detail_record_count	INT	None	Number of segments in this interaction (i.e., number of records in the call_detail table related to this interaction)
email_id	VARCHAR	None	Indentifier of the email interaction
email_detail_id	VARCHAR	None	email_detail_id is the identifier of the given step in processing of the email. A single email may have several records in the call_detail table corresponding to email processing steps (e.g., before and after transfer). Such records will have the same email_id, but each will have its own email_detail_id.
email_subject	VARCHAR	None	Content of the email subject field
email_kb_article_id	VARCHAR	None	Identifier of the article used for replying to this email
response_email_id	VARCHAR	None	Identifier of the article that was sent automatically to acknowledge receipt of this email
case_id	VARCHAR	None	Identifier of the case with which this email is associated
thread_id	VARCHAR	None	thread_id is the identifier of the email thread that this email is part of. This identifier is added to the subject of the email when the email is replied to and is used for case search during possible follow-up emails (see case_search_result).
case_number	VARCHAR	None	case_number specifies the number of the case with which this email is associated. Unlike case_id, case number is a simple number suitable for manual processing.
case_search_result	VARCHAR	None	For each incoming email, the system will look for possible association with an existing case using the thread_id added to the original reply. Possible values include the following: found – A unique case associated with this email was found; the case number is copied to the case_number field found_mulitple – Multiple cases were found; the case_number field is not populated created – No matching cases were found, a new case was created and its number is copied to the case_number field error
caller_has_screen_recording	BIT	None	Indication that screen of the party that originated this interaction was recorded during the interaction
callee_has_screen_recording	BIT	None	Indication that screen of the party that accepted this interaction was recorded during the interaction
email_completion_time	BIGINT	Seconds	Email completion time from the moment the email interaction was accepted or entered agent's personal queue and until it was completed (including ACW if any) or transferred

< Previous | Next >